Skillnad mellan versioner av "Mission Design Guide"
Bankler (diskussion | bidrag) |
Bankler (diskussion | bidrag) |
||
(26 mellanliggande versioner av 2 användare visas inte) | |||
Rad 24: | Rad 24: | ||
The template includes: | The template includes: | ||
− | * Supercarrier with correct frequencies and | + | * Supercarrier with correct frequencies and TACAN. |
− | * Deactivatable backup carrier | + | * Deactivatable backup carrier. |
* F10 menu controlled script that lets us reactivate the TACAN and ILS in case it shuts down because of a bug. | * F10 menu controlled script that lets us reactivate the TACAN and ILS in case it shuts down because of a bug. | ||
− | * Moose framework | + | * Moose framework. |
− | * | + | * Five tankers with patterns and correct frequencies. |
* E-3 AWACS. | * E-3 AWACS. | ||
− | * | + | * 21+ flights of F/A-18C, F-14A/B, AJS 37, A-10C, F-16C, Mirage 2000, F-15E, UH-1H, AH-64D and Ka-50. |
− | * | + | * All aircraft have comms preset synchronized as per Master Arms standards. |
− | * All aircraft have unique modex/tailnumbers. | + | * All aircraft have unique modex/tailnumbers as well as laser codes matching the included kneeboard. |
+ | * Enemies that can be spawned through LotAtc. | ||
+ | * Copy-paste friendly Skynet SAMs (more intelligent than usual SAMs). | ||
Download it here: | Download it here: | ||
− | * [ | + | * [https://wiki.masterarms.se/images/2/29/MA_MissionTemplate_CA_6_5.miz Caucasus Mission Template 6.5] |
− | * [ | + | * [https://wiki.masterarms.se/images/e/e8/MA_MissionTemplate_PG_6_5.miz Persian Gulf Mission Template 6.5] |
− | * [ | + | * [https://wiki.masterarms.se/images/d/d3/MA_MissionTemplate_SY_6_5.miz Syria Mission Template 6.5] |
* Written briefing template: [[Mission Briefing Template]] | * Written briefing template: [[Mission Briefing Template]] | ||
Rad 49: | Rad 51: | ||
* If you have wind, make sure that the carrier route makes the carrier steam ''into'' the wind. No carrier cross-wind. | * If you have wind, make sure that the carrier route makes the carrier steam ''into'' the wind. No carrier cross-wind. | ||
* The wind-over-deck speed should be around 25 kts. If you have zero wind, set the speed to 25. If you have 10 kts of headwind, set the speed to 15 kts. | * The wind-over-deck speed should be around 25 kts. If you have zero wind, set the speed to 25. If you have 10 kts of headwind, set the speed to 15 kts. | ||
+ | ** If you change the wind, you may need to tweak the carrier's heading and speed. Use this tool to know what approximate heading and speed is recommended for any given wind setting. https://magwo.github.io/carrier-cruise/ | ||
* To calculate the BRC, you need to work some magic because of true vs magnetic heading differances. | * To calculate the BRC, you need to work some magic because of true vs magnetic heading differances. | ||
** In Caucasus and in Syria, take the course you see in the ME minus 6. Example: Boat is heading 000. BRC is 353. | ** In Caucasus and in Syria, take the course you see in the ME minus 6. Example: Boat is heading 000. BRC is 353. | ||
Rad 63: | Rad 66: | ||
* Don't use callsigns that are too similar to each other. For instance avoid using two callsigns starting with the same letter (like Viper and Victor). | * Don't use callsigns that are too similar to each other. For instance avoid using two callsigns starting with the same letter (like Viper and Victor). | ||
* Avoid callsigns that are easily associated with a certain aircraft type, if the flight flies something else. For instance, don't have an F-16 flight called Stinger1 or an F/A-18 flight called Viper2 or Falcon3. | * Avoid callsigns that are easily associated with a certain aircraft type, if the flight flies something else. For instance, don't have an F-16 flight called Stinger1 or an F/A-18 flight called Viper2 or Falcon3. | ||
− | |||
− | |||
− | |||
− | |||
''The mission templates have flight names set to Arctic1, Bender2, Crimson3 and so on by default.'' | ''The mission templates have flight names set to Arctic1, Bender2, Crimson3 and so on by default.'' | ||
Rad 72: | Rad 71: | ||
====Tanker Setup==== | ====Tanker Setup==== | ||
<span style="color: green">''The mission templates already have these things set up.''</span> | <span style="color: green">''The mission templates already have these things set up.''</span> | ||
− | * Navy aircraft (F/A-18C and F-14B) use "probe-and-drogue" refueling. They can refuel from KC-135 MPRS and KC-130. | + | * Navy aircraft (F/A-18C and F-14B) use "probe-and-drogue" refueling. They can refuel from KC-135 MPRS, S-3B and KC-130. |
− | * Air Force aircraft (F-16C, F-15C, A-10C) use "flying boom" refuling. They can refuel from KC-135 only ( | + | * Air Force aircraft (F-16C, F-15C, A-10C) use "flying boom" refuling. They can refuel from KC-135 only (NOT the MPRS version). |
− | |||
* Be advised that the KC-130 carries significantly less fuel than the KC-135 MPRS and as such, can refuel fewer aircraft before it heads home. | * Be advised that the KC-130 carries significantly less fuel than the KC-135 MPRS and as such, can refuel fewer aircraft before it heads home. | ||
− | |||
* You may want to add a two-ship HAVCAP that escorts the main tankers. | * You may want to add a two-ship HAVCAP that escorts the main tankers. | ||
* To setup a tanker pattern, add two waypoints (1 and 2) in addition to the starting waypoint. On WP1, add an action "ORBIT / RACE-TRACK". The tanker will fly in a race-track between WP1 and WP2. | * To setup a tanker pattern, add two waypoints (1 and 2) in addition to the starting waypoint. On WP1, add an action "ORBIT / RACE-TRACK". The tanker will fly in a race-track between WP1 and WP2. | ||
* For tankers at about 15000-17000', a ground speed of 360 kts is good. Don't forget to set this speed in the Orbit Waypoint action as well. | * For tankers at about 15000-17000', a ground speed of 360 kts is good. Don't forget to set this speed in the Orbit Waypoint action as well. | ||
* We recommend setting the tankers' "Reaction to Threat" setting to "Passive Defence". | * We recommend setting the tankers' "Reaction to Threat" setting to "Passive Defence". | ||
− | * In most missions, you should setup three tankers: | + | * In most missions, you should setup three (or more) tankers: |
− | ** 1) Navy overhead tanker using Ch 14 (260.00). Could be KC-135 MPRS or a KC-130. Recommended callsign " | + | ** 1) Navy overhead tanker using Ch 14 (260.00). Could be KC-135 MPRS or a KC-130. Recommended callsign "Arco1" and TCN 101Y. |
− | ** 2) Air Force main tanker using Ch 20 (266.00). Always a KC-135. Recommended callsign " | + | ** 2) Air Force main tanker using Ch 20 (266.00). Always a KC-135. Recommended callsign "Texaco2" and TCN 102Y. |
− | ** 3) Navy overhead tanker using Ch 19 (253.00). Could be KC-135 MPRS or a KC-130. Recommended callsign " | + | ** 3) Navy overhead tanker using Ch 19 (253.00). Could be S-3B, KC-135 MPRS or a KC-130. Recommended callsign "Shell3" and TCN 103Y. |
====AWACS Setup==== | ====AWACS Setup==== | ||
Rad 95: | Rad 92: | ||
* Set the AWACS frequency to 251.00. Normally we have a human acting AWACS on Ch 3 (265.00). Channel 18 (251.00) is the AI AWACS channel (normally not used). | * Set the AWACS frequency to 251.00. Normally we have a human acting AWACS on Ch 3 (265.00). Channel 18 (251.00) is the AI AWACS channel (normally not used). | ||
* We recommend setting the aircraft's "Reaction to Threat" setting to "Passive Defence". | * We recommend setting the aircraft's "Reaction to Threat" setting to "Passive Defence". | ||
+ | |||
+ | ====Bullseye Placement==== | ||
+ | Pilots and AWACS often need to describe locations relative to a known pre-briefed location, called the bullseye. | ||
+ | |||
+ | * Place the bullseye between friendly airspace and enemy airspace, 20-100 NM from anticipated engagement area. | ||
+ | * If possible, place the bullseye on a geographically well-known, visually spottable location such as a city, village, bridge, mountain or airfield. | ||
+ | * Don't place the bullseye on a target area. It causes impractically large bearing changes when aircraft are moving around the target area. | ||
====Radio Presets==== | ====Radio Presets==== | ||
Rad 104: | Rad 108: | ||
====Mission Customization==== | ====Mission Customization==== | ||
<span style="color: red">''To allow for convenient testing, the mission templates don't have F10 View set to "Map Only", so you need to change it manually.''</span> | <span style="color: red">''To allow for convenient testing, the mission templates don't have F10 View set to "Map Only", so you need to change it manually.''</span> | ||
+ | * You typically want to set all waypoints to ground level (set them to 0 and it will get moved to ground level). Especially important on target waypoints. | ||
+ | * Do not zoom the map all the way out before saving. The can cause the map to get "stuck" on certain aspect ratio monitors. Set it approx 50% zoomed in or so. | ||
+ | * Do not include large groups of ground movers. Especially not in the vicinity of structures that can block their path finding. If a ground mover needs to move through a town, set its waypoints to "on road", so it avoids the buildings and backyards. | ||
* Buildings can not be seen in TacView. So if you have buildings as targets, put a Russian Infantry in the roof, and set WP 0 to "Set Option/ROE/Weapon Hold" and "Perform Task/HOLD", to make sure we can evaluate if we hit the targets after a mission. | * Buildings can not be seen in TacView. So if you have buildings as targets, put a Russian Infantry in the roof, and set WP 0 to "Set Option/ROE/Weapon Hold" and "Perform Task/HOLD", to make sure we can evaluate if we hit the targets after a mission. | ||
* When developing the mission, it's nice to have the F10 View Option set to "All", for easy debugging. | * When developing the mission, it's nice to have the F10 View Option set to "All", for easy debugging. | ||
Rad 115: | Rad 122: | ||
* Even if the mission turns out to be easy, meaning nobody got shot down or was close to being so, you can count on that the mission will get challenging regardless. Comms, formation flying, keeping SA, aerial refueling and so on are very challenging and fun elements in themselves, even without somebody shooting at you. | * Even if the mission turns out to be easy, meaning nobody got shot down or was close to being so, you can count on that the mission will get challenging regardless. Comms, formation flying, keeping SA, aerial refueling and so on are very challenging and fun elements in themselves, even without somebody shooting at you. | ||
* Don't over-complicate things. With lots of players, things will get complicated regardless. | * Don't over-complicate things. With lots of players, things will get complicated regardless. | ||
− | * Always assign a package lead/mission commander | + | * DCS always has a number of bugs, and some of them appear only in MP. Be very conservative using triggers. Avoid triggers that are crucial for the mission flow. |
+ | * Always assign a package lead/mission commander. Inform them a couple of days before the flight preferably. If you don't have anybody else, consider taking this responsibility yourself. Don't run the mission without a formal commander. | ||
==Written Briefing Considerations== | ==Written Briefing Considerations== | ||
+ | This is the recommended format for the written briefing. | ||
+ | Here's a copy-paste friendly briefing template: [[Mission Briefing Template]] | ||
− | + | *Event details | |
− | + | **RSVP | |
− | + | **Activity | |
− | + | **Theatre | |
− | * | + | **Modules |
− | * | + | **Prerequisites (State any general or slot-specific prerequisites for participation (i.e CASE 3, BQ, AAR etc)) |
− | * | + | **Lineup |
− | * | + | *1 SITUATION |
− | * | + | **1.1 Overview |
− | * | + | **1.2 Area of operations |
− | + | **1.3 Time and weather | |
− | + | **1.4 Air threats | |
− | + | **1.5 Ground threats | |
− | * | + | **1.6 Friendly forces |
− | * | + | **1.7 Civilian/3rd part |
− | * | + | *2 MISSION |
− | * | + | *3 EXECUTION |
− | * | + | **3.1 Commander’s intent |
− | * | + | **3.2 Packages |
− | * | + | **3.3 Order of events |
− | * | + | **3.4 Rules of engagement |
− | * | + | **3.5 Acceptable level of risk |
− | * | + | **3.6 Flight tasking |
− | * | + | *4 ADMINISTRATION AND LOGISTICS |
− | * | + | **4.1 Airfield operations |
− | * | + | **4.2 Carrier operations |
− | * | + | **4.3 Tankers |
+ | *5 COMMAND AND CONTROL | ||
+ | **5.1 Commander | ||
+ | **5.2 Frequencies | ||
+ | **5.3 Authentication | ||
+ | **5.4 Freq flow (Airfield flights) | ||
+ | **5.5 Freq flow (Carrier flights) | ||
+ | **5.6 Brevity | ||
+ | **5.7 Bullseye | ||
+ | *6 ANNEXES (maps and so on) | ||
==Step Briefing Considerations== | ==Step Briefing Considerations== |
Nuvarande version från 30 september 2024 kl. 20.16
Innehåll
Goals
- Make it a smooth process for mission designers to create new missions.
- Establish standard configurations for things such as callsigns, comms and TACAN channels.
- Provide workarounds for common DCS problems, such as loss of TACAN.
- Provide tips for how to design a fun mission.
Game Options Considerations
Some settings that you set in the game's options (available through the DCS main menu) are copied into the actual mission. You need to make sure the following is setup in your options:
- Gameplay / Wake Turbulence OFF
- Gameplay / Easy Communication OFF
Mission Editor Considerations
Mission Template
To make things easy, you can download a template .miz file that has all the basic stuff already setup for you. This will most likely save you quite a lot of time.
The template includes:
- Supercarrier with correct frequencies and TACAN.
- Deactivatable backup carrier.
- F10 menu controlled script that lets us reactivate the TACAN and ILS in case it shuts down because of a bug.
- Moose framework.
- Five tankers with patterns and correct frequencies.
- E-3 AWACS.
- 21+ flights of F/A-18C, F-14A/B, AJS 37, A-10C, F-16C, Mirage 2000, F-15E, UH-1H, AH-64D and Ka-50.
- All aircraft have comms preset synchronized as per Master Arms standards.
- All aircraft have unique modex/tailnumbers as well as laser codes matching the included kneeboard.
- Enemies that can be spawned through LotAtc.
- Copy-paste friendly Skynet SAMs (more intelligent than usual SAMs).
Download it here:
- Caucasus Mission Template 6.5
- Persian Gulf Mission Template 6.5
- Syria Mission Template 6.5
- Written briefing template: Mission Briefing Template
Detailed Basic Instructions
This section covers all the things that should be considered in all missions. If you're using the mission template, most of this stuff is already taken care of.
Carrier Setup
The mission templates already have these things set up.
- Use ship number for TACAN (72X for CVN-72) and 264.00 for AI comms.
- Use the method showcased in the template .miz to allow for TACAN and ILS reactivation.
- If you have wind, make sure that the carrier route makes the carrier steam into the wind. No carrier cross-wind.
- The wind-over-deck speed should be around 25 kts. If you have zero wind, set the speed to 25. If you have 10 kts of headwind, set the speed to 15 kts.
- If you change the wind, you may need to tweak the carrier's heading and speed. Use this tool to know what approximate heading and speed is recommended for any given wind setting. https://magwo.github.io/carrier-cruise/
- To calculate the BRC, you need to work some magic because of true vs magnetic heading differances.
- In Caucasus and in Syria, take the course you see in the ME minus 6. Example: Boat is heading 000. BRC is 353.
- In Persian Gulf, take the course you see in the ME minus 2. Example: Boat is heading 000. BRC is 358.
Flight Callsigns
The mission templates have flight names set to Arctic1, Bender2, Crimson3 and so on by default, and you are recommended to keep them. Feel free to be creative and change them, but if you do, a new custom transponder json file will have to be created for your mission, making things more complicated.
Using the callsigns in the templates make things easier. Here is a spreadsheet with the flights available in the templates:
Here are a few guidelines:
- Unless there's a good reason for not doing so, use incremental numbers on the flights. If you have three flights and want to use the names Adam, Boxer and Charlie, call them Adam1, Boxer2 and Charlie3.
- Don't use callsigns that are too similar to each other. For instance avoid using two callsigns starting with the same letter (like Viper and Victor).
- Avoid callsigns that are easily associated with a certain aircraft type, if the flight flies something else. For instance, don't have an F-16 flight called Stinger1 or an F/A-18 flight called Viper2 or Falcon3.
The mission templates have flight names set to Arctic1, Bender2, Crimson3 and so on by default.
Tanker Setup
The mission templates already have these things set up.
- Navy aircraft (F/A-18C and F-14B) use "probe-and-drogue" refueling. They can refuel from KC-135 MPRS, S-3B and KC-130.
- Air Force aircraft (F-16C, F-15C, A-10C) use "flying boom" refuling. They can refuel from KC-135 only (NOT the MPRS version).
- Be advised that the KC-130 carries significantly less fuel than the KC-135 MPRS and as such, can refuel fewer aircraft before it heads home.
- You may want to add a two-ship HAVCAP that escorts the main tankers.
- To setup a tanker pattern, add two waypoints (1 and 2) in addition to the starting waypoint. On WP1, add an action "ORBIT / RACE-TRACK". The tanker will fly in a race-track between WP1 and WP2.
- For tankers at about 15000-17000', a ground speed of 360 kts is good. Don't forget to set this speed in the Orbit Waypoint action as well.
- We recommend setting the tankers' "Reaction to Threat" setting to "Passive Defence".
- In most missions, you should setup three (or more) tankers:
- 1) Navy overhead tanker using Ch 14 (260.00). Could be KC-135 MPRS or a KC-130. Recommended callsign "Arco1" and TCN 101Y.
- 2) Air Force main tanker using Ch 20 (266.00). Always a KC-135. Recommended callsign "Texaco2" and TCN 102Y.
- 3) Navy overhead tanker using Ch 19 (253.00). Could be S-3B, KC-135 MPRS or a KC-130. Recommended callsign "Shell3" and TCN 103Y.
AWACS Setup
The mission templates already have these things set up.
- There are two different EW aircraft. E-2D Hawkeye and E-3 Sentry. We recommend using the E-3 because of its superior radar coverage.
- Put the aircraft in a location between the airfield or carrier and the enemy AO, in such a way that it can be protected by friendly forces if needed.
- E-3 normally flies at around 29000' at 0.75M.
- E-2D normally flies at around 22000' at 250 kts indicated airspeed.
- You may want to add a two-ship HAVCAP aircraft that escorts the EW aircraft.
- Set the AWACS frequency to 251.00. Normally we have a human acting AWACS on Ch 3 (265.00). Channel 18 (251.00) is the AI AWACS channel (normally not used).
- We recommend setting the aircraft's "Reaction to Threat" setting to "Passive Defence".
Bullseye Placement
Pilots and AWACS often need to describe locations relative to a known pre-briefed location, called the bullseye.
- Place the bullseye between friendly airspace and enemy airspace, 20-100 NM from anticipated engagement area.
- If possible, place the bullseye on a geographically well-known, visually spottable location such as a city, village, bridge, mountain or airfield.
- Don't place the bullseye on a target area. It causes impractically large bearing changes when aircraft are moving around the target area.
Radio Presets
The mission templates already have these things set up.
- As far as it is possible, all aircraft should have the same radio presets for the UHF radio. It should follow the Master Arms standard Comms plan, which is identical to the DCS standard list for F/A-18C and F-16C (305.00, 264.00, 265.00 and so on).
- Normally, you only have to change F-14 and AJS 37 flights.
- AJS 37 flights should have Special 1: 270.00, Special 2: 257.00, Special 3: 265.00
Mission Customization
To allow for convenient testing, the mission templates don't have F10 View set to "Map Only", so you need to change it manually.
- You typically want to set all waypoints to ground level (set them to 0 and it will get moved to ground level). Especially important on target waypoints.
- Do not zoom the map all the way out before saving. The can cause the map to get "stuck" on certain aspect ratio monitors. Set it approx 50% zoomed in or so.
- Do not include large groups of ground movers. Especially not in the vicinity of structures that can block their path finding. If a ground mover needs to move through a town, set its waypoints to "on road", so it avoids the buildings and backyards.
- Buildings can not be seen in TacView. So if you have buildings as targets, put a Russian Infantry in the roof, and set WP 0 to "Set Option/ROE/Weapon Hold" and "Perform Task/HOLD", to make sure we can evaluate if we hit the targets after a mission.
- When developing the mission, it's nice to have the F10 View Option set to "All", for easy debugging.
- When you are done, before actually playing the mission, change this option to "Map Only" (and enforce it), so people can't use the F10 map as a GPS.
- Enforce the padlock option to "OFF".
- You can enforce Labels to "OFF" if you want. But we recommend leaving it not enforced. The mission needs to allow "Neutral Dot Labels" to allow for pilots to use the Mini Dot Labels mod found under Mods. Typically, we trust people to not use actual full labels.
Design Considerations
- While it's up to you as a mission designer to decide the difficulty level, be advised that it's more common that one accidently makes the mission too hard than too easy. It's tempting to add lots of enemies, but generally it's not needed to provide an interesting challenge.
- Even if the mission turns out to be easy, meaning nobody got shot down or was close to being so, you can count on that the mission will get challenging regardless. Comms, formation flying, keeping SA, aerial refueling and so on are very challenging and fun elements in themselves, even without somebody shooting at you.
- Don't over-complicate things. With lots of players, things will get complicated regardless.
- DCS always has a number of bugs, and some of them appear only in MP. Be very conservative using triggers. Avoid triggers that are crucial for the mission flow.
- Always assign a package lead/mission commander. Inform them a couple of days before the flight preferably. If you don't have anybody else, consider taking this responsibility yourself. Don't run the mission without a formal commander.
Written Briefing Considerations
This is the recommended format for the written briefing. Here's a copy-paste friendly briefing template: Mission Briefing Template
- Event details
- RSVP
- Activity
- Theatre
- Modules
- Prerequisites (State any general or slot-specific prerequisites for participation (i.e CASE 3, BQ, AAR etc))
- Lineup
- 1 SITUATION
- 1.1 Overview
- 1.2 Area of operations
- 1.3 Time and weather
- 1.4 Air threats
- 1.5 Ground threats
- 1.6 Friendly forces
- 1.7 Civilian/3rd part
- 2 MISSION
- 3 EXECUTION
- 3.1 Commander’s intent
- 3.2 Packages
- 3.3 Order of events
- 3.4 Rules of engagement
- 3.5 Acceptable level of risk
- 3.6 Flight tasking
- 4 ADMINISTRATION AND LOGISTICS
- 4.1 Airfield operations
- 4.2 Carrier operations
- 4.3 Tankers
- 5 COMMAND AND CONTROL
- 5.1 Commander
- 5.2 Frequencies
- 5.3 Authentication
- 5.4 Freq flow (Airfield flights)
- 5.5 Freq flow (Carrier flights)
- 5.6 Brevity
- 5.7 Bullseye
- 6 ANNEXES (maps and so on)
Step Briefing Considerations
- Try to start the briefing asap. Don't wait more than a couple of minutes for late-joiners.
- Quickly go through the plan from an overview perspective.
- Let the mission commander, AWACS operator and ATC/Carrier people communicate any additional instructions and potential risks everyone needs to be aware of.
- Allow for questions but avoid long discussions.
- Keep the tempo up! Make sure the briefing doesn't take more than 15 minutes for easier missions and 30 minutes for very advanced missions.
- Allow for a quick restroom break just before starting the server.