SRS Setup Guide

Från Master Arms Wiki
Version från den 2 februari 2024 kl. 13.18 av DeadGun (diskussion | bidrag)
Hoppa till navigering Hoppa till sök

Home >> Technical Guides >> Technical Checklist >> Setup Guide

Default Setup

Start SRS and setup tabs as described below:
General-Tab

  1. Set Microphone/Speakers as needed
  2. Set Speaker Boost to something between 10-20 dB or as preferred.
  3. Set EAM Name (Your callsign)

Settings-Tab

  1. Check/Set PROFILE = "default"

Control-Tab

  1. Check that all lines are cleared (Radio 1, Device=None, Button=None etc.). If not, press "CLEAR".

Favourites-Tab

  1. Name: Master Arms Primary, ServerAdress: SR.MASTERARMS.SE:5002, EAM Coal. Pass: blue
  2. Name: Master Arms Secondary, ServerAdress: SR.MASTERARMS.SE:5003, EAM Coal. Pass: blue (optional)

Settings-Tab

  1. Check/Set GLOBAL SETTINGS -> AUTO CONNECT -> Auto Connect = ON
  2. Check/Set GLOBAL SETTINGS -> MISCELLANOUS SETTINGS -> Auto Select Profile For Aircraft = ON
  3. Select "COPY PROFILE"
  4. Name the profile according to table below
  5. Change PROFILE from "default" to the one you created. (e.g FA-18 if you created a F/A-18C profile)
  6. Setup profile according to the instructions for Fixed/Rotary Wing below

Profile Names

Module Profile Name
A-10C II A-10C2
AJS 37 AJS37
F-14A/B Pilot F-14
F-14A/B RIO F-14_2
F-15E Pilot F-15E
F-15E WSO F-15E_2
F-16C F-16
F/A-18C FA-18
M-2000C M2000
AH-64D Pilot AH-64
AH-64D CPG AH-64_2

Fixed Wing

A-10C II

AJS 37

F-14A/B

F-15E

F-16C

F/A-18C

M-2000C

Rotary Wing

AH-64D Pilot