Skillnad mellan versioner av "SRS Setup Guide"

Från Master Arms Wiki
Hoppa till navigering Hoppa till sök
m
Rad 2: Rad 2:
  
 
==Default Setup==
 
==Default Setup==
 +
If you're flying multiple aircraft types, you might need somewhat different settings for the different types. Instead of manually changing these settings when you switch aircraft, you're encouraged to use SRS profiles, automatically adjusting the settings depending on what aircraft you're currently using. Using profiles also has advantages even if you only fly one aircraft, as it distinguishes spectator mode from flying mode. The following guide goes through the setup.
 +
 
Start SRS and setup tabs as described below:
 
Start SRS and setup tabs as described below:
 
</br>
 
</br>

Versionen från 8 februari 2024 kl. 14.55

Home >> Technical Guides >> Technical Checklist >> Setup Guide

Default Setup

If you're flying multiple aircraft types, you might need somewhat different settings for the different types. Instead of manually changing these settings when you switch aircraft, you're encouraged to use SRS profiles, automatically adjusting the settings depending on what aircraft you're currently using. Using profiles also has advantages even if you only fly one aircraft, as it distinguishes spectator mode from flying mode. The following guide goes through the setup.

Start SRS and setup tabs as described below:
General-Tab

  1. Set Microphone/Speakers as needed
  2. Set Speaker Boost to something between 10-20 dB or as preferred.
  3. Set EAM Name (Your callsign)

Settings-Tab

  1. Check/Set PROFILE = "default"

Control-Tab

  1. Check that all lines are cleared (Radio 1, Device=None, Button=None etc.). If not, press "CLEAR".

Favourites-Tab

  1. Name: Master Arms Primary, ServerAdress: SR.MASTERARMS.SE:5002, EAM Coal. Pass: blue
  2. Name: Master Arms Secondary, ServerAdress: SR.MASTERARMS.SE:5003, EAM Coal. Pass: blue (optional)

Settings-Tab

  1. Check/Set GLOBAL SETTINGS -> AUTO CONNECT -> Auto Connect = ON
  2. Check/Set GLOBAL SETTINGS -> MISCELLANOUS SETTINGS -> Auto Select Profile For Aircraft = ON
  3. Select "COPY PROFILE"
  4. Name the profile according to table below
    * Repeat step 3-4 for all the modules you are using.
  5. Change PROFILE from "default" to the one you created. (e.g FA-18 if you created a F/A-18C profile)
  6. Setup profile according to the instructions for Fixed/Rotary Wing below
    * Repeat step 5-6 for all the profiles you created.

Profile Names

Module Profile Name
A-10C II A-10C2
AJS 37 AJS37
F-14A/B Pilot F-14
F-14A/B RIO F-14_2
F-15E Pilot F-15E
F-15E WSO F-15E_2
F-16C F-16
F/A-18C FA-18
M-2000C M2000
AH-64D Pilot AH-64
AH-64D CPG AH-64_2

Fixed Wing

A-10C II

Control-Tab

  • Bind Radio 1, 2 and 3 to different HOTAS buttons (Recommended: Forward, Down and Aft on a 4-way switch on the throttle)

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = ON
- ALWAYS allow Transponder Overlay Controls = OFF
- Allow INCOCKPIT DCS Controlled PTT = OFF
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start, set "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

AJS 37

Control-Tab

  • Bind Radio 1 and 3 to different HOTAS buttons (Recommended: Left and Right on a 2/4-way switch on the joystick)

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = ON
- ALWAYS allow Transponder Overlay Controls = ON
- Allow INCOCKPIT DCS Controlled PTT = OFF
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start, set "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

F-14A/B Pilot

Control-Tab

  • Bind Radio 1, 2 and "Special Intercom Select & PTT" to different HOTAS buttons (Recommended: Forward, Down and Aft on a 4-way switch on the throttle)

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = ON
- ALWAYS allow Transponder Overlay Controls = OFF
- Allow INCOCKPIT DCS Controlled PTT = OFF
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start, set "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

F-14A/B RIO

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = OFF
- ALWAYS allow Transponder Overlay Controls = OFF
- Allow INCOCKPIT DCS Controlled PTT = ON
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start, set "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

DCS

  • Bind axis "ICS Button ICS (Intercom) PTT (axis threshold) - SRS or VoIP Only / No Menu" to left toe brake
  • Bind axis "ICS Button MIC (UHF) PTT (axis threshold) - SRS or VoIP Only / No Menu" to left toe brake
  • Bind "XMTR SEL UHF1 and UHF2" to a 2-way switch (selects radio to transmit on)

F-15E Pilot/WSO

Control-Tab

  • Bind Radio 1, 2 and "Special Intercom Select & PTT" to different HOTAS buttons (Recommended: Forward, Down and Aft on a 4-way switch on the throttle)

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = ON
- ALWAYS allow Transponder Overlay Controls = OFF
- Allow INCOCKPIT DCS Controlled PTT = OFF
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start, set "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

F-16C

Control-Tab

  • Bind Radio 1 and 2 to different HOTAS buttons (preferably Forward and Aft on a 2/4-way switch on the throttle)

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = ON
- ALWAYS allow Transponder Overlay Controls = OFF
- Allow INCOCKPIT DCS Controlled PTT = OFF
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start, set "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

F/A-18C

Control-Tab

  • Bind Radio 1, 2 and 3 to different HOTAS buttons (Recommended: Forward, Down and Aft on a 4-way switch on the throttle)

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = ON
- ALWAYS allow Transponder Overlay Controls = OFF
- Allow INCOCKPIT DCS Controlled PTT = OFF
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start set:
  • MIDS Tx & Rx Effects = OFF
  • "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

M-2000C

Control-Tab

  • Bind Radio 1 and 2 to different HOTAS buttons (preferably Forward and Aft on a 2/4-way switch on the throttle)

Settings-Tab

  • Go to PROFILE SETTINGS -> CONTROL/COCKPIT INTEGRATION and Check/Set:
- Radio Switch work as Push To Talk(PTT) = ON
- Auto Select First Channel Preset = ON
- ALWAYS allow SRS Hotkeys = ON
- ALWAYS allow Transponder Overlay Controls = OFF
- Allow INCOCKPIT DCS Controlled PTT = OFF
- Rotary Style Frequency Increment/Decrement = OFF
  • Go to PROFILE SETTINGS -> RADIO EFFECT SETTINGS and set as desired*.
- As a start, set "Enable Ambient Cockpit Effects" to ≈ 10% or OFF
  • Go to PROFILE SETTINGS -> AUDIO and set as desired*.
*Can be changed in-game if needed

Rotary Wing

AH-64D Pilot